What is a gantry crane and where is it used?

A gantry crane is a lifting machine with a bridge girder supported on freestanding legs that travel on rails or wheels. A trolley and hoist move along the girder to lift and position loads. It is used in fabrication shops, steel and precast yards, stockyards, warehouses, shipyards, container handling areas and other industrial sites where loads must be moved across a wide area.

What is the difference between a gantry crane and an EOT crane?

An EOT crane runs on runway beams fixed to building columns, so it needs a building structure designed to carry it and is used indoors. A gantry crane stands on its own legs and can work outdoors, in open yards or inside a shed without a raised runway. EOT cranes suit fixed production bays, while gantry cranes suit yards and areas where the building cannot carry crane loads.

What types of gantry cranes are available?

Gantry cranes are classified by girder arrangement (single girder or double girder), by leg arrangement (full gantry or semi-gantry) and by travel system (rail-mounted or rubber-tired). Light-duty portable gantries are also used in workshops. The right type depends on the load, span, height, duty cycle and the surface the crane will travel on.

How do I choose the right gantry crane for my plant or yard?

Start with the heaviest load and the type of material, then note the span, lifting height, travel length, how often the crane will work each day, whether it will be used indoors or outdoors, and the available power supply. Share these details with the manufacturer so the girder type, drive system and controls can be matched to your operation.

What affects the price of a gantry crane?

Price depends mainly on lifting capacity, span, lifting height, single or double girder design, rail-mounted or rubber-tired travel, duty class, control type, outdoor protection and the scope of installation and rails. Because each crane is engineered for the site, a specification-based quotation is more reliable than a general rate.

Can gantry cranes be used outdoors?

Yes. Gantry cranes are commonly used in open yards and ports. For outdoor use, the specification should include suitable protective coatings, protected electrical equipment and design allowance for wind, so mention your site conditions when requesting a quotation.

What support does Shiv Shankar Techno provide for gantry cranes?

As gantry crane manufacturers in India, Shiv Shankar Techno Industries Pvt. Ltd. handles gantry crane design, fabrication, load testing and installation, followed by maintenance and spare parts support. Our gantry crane page lists rail-mounted and rubber-tired configurations with capacities from 10 to 200 tons, and the final specification is engineered for each project. You can download the brochure or contact the team with your requirement.

What maintenance does a gantry crane need?

Routine maintenance includes checking wire ropes, hooks, brakes, limit switches, wheels, rails, bolted joints, electrical connections and structural coatings. Inspections should follow a regular schedule and be carried out by trained personnel, with any worn parts replaced before they affect safe operation.

Gantry Crane Manufacturers in India | Shiv Shankar Techno

Gantry Crane Manufacturers in India for Workshops, Yards and Ports

A gantry crane is a lifting machine with a bridge girder on freestanding legs that travel on rails or wheels, so it needs no elevated runway. It moves steel, machinery, precast elements and containers across workshops and yards. Shiv Shankar Techno Industries is one of the gantry crane manufacturers in India offering in-house design, fabrication, installation and after-sales support from Chittorgarh, Rajasthan. For covered production bays we also build EOT cranes.

What is a Gantry Crane and How Does It Work?

A trolley and hoist travel along the bridge girder while the legs move on rails or wheels, so the hook can reach any point in the covered area. Common types are single or double girder, full or semi-gantry, and rail-mounted or rubber-tired. Unlike an EOT crane, which runs on runway beams fixed to building columns, a gantry crane stands on its own legs and suits open yards as well as sheds. As gantry crane manufacturers in India, we match the type to your load, span and site.

How to Choose a Gantry Crane: Selection, Safety and Maintenance

Share these points before requesting quotations from gantry crane manufacturers in India, so the crane is matched to your site and stays safe in service.

Choose the Crane Type

Decide between single and double girder, full or semi-gantry, and rail-mounted or rubber-tired travel based on the load, area covered and the ground or runway available. Main parts to specify are the girder, legs, end carriages, trolley, hoist and controls.

Define Load, Span and Height

Note the heaviest lift, the span between legs, the lifting height and the travel length, including any future load growth you expect.

Match Duty and Environment

Tell us how many hours a day the crane will work and whether it will operate indoors, in an open yard or near a coast, so coatings, electrics and wind allowance suit the site.

Plan Controls and Safety

Specify pendant, remote or cabin control, and ensure limit switches and protective devices are included. Operators should be trained, and loads should never exceed the rated capacity.

Plan Installation and Maintenance

Confirm rails, foundations and power supply before erection. After handover, schedule regular inspection of ropes, hooks, brakes, wheels, rails and electrical parts, with spare parts support available.

Your Gantry Crane Manufacturer in India and Long-Term Service Partner

Shiv Shankar Techno Industries is a gantry crane manufacturer and supplier serving customers across India, with design, fabrication, load testing and installation handled in-house. Our gantry cranes serve workshops, yards, warehouses, shipyards, ports and container handling areas. We also build EOT cranes, derrick cranes and prefabricated structures, so crane and building requirements can be coordinated together.

To discuss your requirement, share the load, span, lifting height, location and intended use with our team. Call us for a site-specific quotation or download the brochure to review configurations and technical details.

CALL US: +91 98292 55906

Why Choose Shiv Shankar Techno Industries for Gantry Cranes

Rail-Mounted & Rubber-Tired Configurations: Customers looking for gantry crane manufacturers in India can get a crane configured for shipyards, yards and manufacturing facilities.
Capacities from 10 to 200 Tons: A wide capacity range for workshops, ports, logistics hubs and industrial sites, with the final specification engineered for each project.
Precise Positioning with Advanced Controls: Control systems selected for smooth, accurate load placement in busy production and yard areas.
Weather-Resistant Design for Outdoor Operations: Protective finishes and sealed electrics help the crane perform reliably in open yards and demanding environments.
Modular Construction & End-to-End Support: Component-based design simplifies transport and installation, backed by in-house design, load testing and after-sales support from one of the gantry crane manufacturers in India.